Novol Finish Putty - 250g

Novol Finish Finishing Putty 250g

FINISH finishing putty for knifing application.

It is used for repairing small surfaces and final smoothing of surface before application of fillers.

Fine grain fillers make it an excellent material for thin-coat application and filling of small holes and scratches.

It may be sanded with fine grade sandpaper to obtain a very smooth surface.

It also has a very good adhesion to various substrates, including galvanized steel.

Suitable for application on many surfaces including

Polyester laminate
Steel
Galvanized steel
Aluminium
Two component acrylic primers
Old paint coatings
242 g Putty 8 g Hardener

Colour: - White

Mixing ratio:

Putty Finish - 100 parts by weight

Hardener - 2 to 3 parts by weight

Drying time: From 25 to 35 min at 20 C.?

VOC limit. (Ref. II / B / b) = 250 g / l - VOC <90 g / l

Do not apply directly on the ground reactive (wash primers), one-component acrylic and nitrocellulose.

Designed for application with putty knife

It is used to repair of small areas and the final surface putty before applying the primer.

Thanks to the finest fillers it applies in thin layers perfectly and fills the small cavities and cracks.

Allows sanding with fine-grained abrasive papers, leaving a very smooth surface.

It also has very good adhesion to various surfaces including galvanized steel

How to use:

Mix well until even in colour and texture

Follow the recommended amount of hardener 2-3 : 100 apply a layer with a thickness of less than 5 mm.