Call our friendly team: 09 277 7016
Autoline 18mm Masking Tape 50m
$2.42–$82.50
Autoline Gold 150mm Sanding Discs (15H)
$30.00–$37.03
Autoline 44mm Masking Tape 50M Roll
$5.74–$85.00
Air Regulator for Spray Guns
$13.50
$16.50
Putty Mixing Pad (Onion Board) 100xSheets (100gsm)
$9.99
$13.50
Plan Prepsol 1Ltr
$14.95
Premier PBS Disposable Paint Cups
$40.00–$50.00
Autoline Gold 150mm Sanding Discs - (7H)
$30.00–$37.03
SPRAY BRUNOX - RUST STOP & EPOXY PRIMER 400ML
$34.50
$35.40
Autoline W&D Sandpaper (x50)
$28.99
Novol 1K Acrylic Spot Putty - 100ml Tube
$9.99
$12.14
Novol Gravit 630 BLACK - Polyurethane Sealant
$11.50
$13.20
Adhesive Eraser Wheel / Caramel Wheel
$7.90
$10.01
Autoline 36mm Yellow Masking Tape 50m Roll
$4.30–$85.73
Single Edge Razor Blade PKT - No. 12 USA
$13.50
$15.00
Spray Gun Cleaning Kit - 17 Piece
$8.50
$11.98
20L Gunwash
$80.50
Water and Oil Separator for Air Spray Guns
$21.02
$23.10
Colad Fine Line Tape 55m
$8.71
Evercoat Z-Grip - 3L
$62.40
$65.00
Stainless Steel Bog Spreaders - 4Pc
$5.00
$7.48
Novol Protect 300 2K Primer Grey - 1.25L Kit (1L+0.25L)
$30.00
$34.50
MLB 2K Clear Kit Fast Dry 4:1
$40.00–$75.00
1L BRUNOX - RUST STOP & EPOXY PRIMER ALL-IN-ONE!
$74.98
$80.00
Autoline 24mm Masking Tape 50M Roll
$3.50–$85.73
HDPE Paint Masking Film
$20.00–$29.90
- Login Account
- 0
-
0 Your Cart $0.00
Autoline 18mm Masking Tape 50m
$2.42–$82.50
Autoline Gold 150mm Sanding Discs (15H)
$30.00–$37.03
Autoline 44mm Masking Tape 50M Roll
$5.74–$85.00
Air Regulator for Spray Guns
$13.50
$16.50
Putty Mixing Pad (Onion Board) 100xSheets (100gsm)
$9.99
$13.50
Plan Prepsol 1Ltr
$14.95
Premier PBS Disposable Paint Cups
$40.00–$50.00
Autoline Gold 150mm Sanding Discs - (7H)
$30.00–$37.03
SPRAY BRUNOX - RUST STOP & EPOXY PRIMER 400ML
$34.50
$35.40
Autoline W&D Sandpaper (x50)
$28.99
Novol 1K Acrylic Spot Putty - 100ml Tube
$9.99
$12.14
Novol Gravit 630 BLACK - Polyurethane Sealant
$11.50
$13.20
Adhesive Eraser Wheel / Caramel Wheel
$7.90
$10.01
Autoline 36mm Yellow Masking Tape 50m Roll
$4.30–$85.73
Single Edge Razor Blade PKT - No. 12 USA
$13.50
$15.00
Spray Gun Cleaning Kit - 17 Piece
$8.50
$11.98
20L Gunwash
$80.50
Water and Oil Separator for Air Spray Guns
$21.02
$23.10
Colad Fine Line Tape 55m
$8.71
Evercoat Z-Grip - 3L
$62.40
$65.00
Stainless Steel Bog Spreaders - 4Pc
$5.00
$7.48
Novol Protect 300 2K Primer Grey - 1.25L Kit (1L+0.25L)
$30.00
$34.50
MLB 2K Clear Kit Fast Dry 4:1
$40.00–$75.00
1L BRUNOX - RUST STOP & EPOXY PRIMER ALL-IN-ONE!
$74.98
$80.00
Autoline 24mm Masking Tape 50M Roll
$3.50–$85.73
HDPE Paint Masking Film
$20.00–$29.90
Browse All Categories
All Prices Are Including GST
Description
719 Polyetch is a top of the range, two-pack, anticorrosive self-etching primer. It is based on vinyl / butyral / phenolic resins and zinc tetroxy-chromate pigment. The catalyst contains phosphoric acid.
Uses:
Gives excellent adhesion to galvanised steel and nonferrous metals. Gives extra protection to ferrous metals when used as the first primer coat.
Spray apply 70-100 microns Wet Film Thickness to achieve 7-10 microns Dry Film Thickness.
Must be overcoated the same day - no sanding.
Allow 1 hour before overcoating with epoxies, 20 minutes for other coatings.
Must use intermediate primer when overcoating with single pack topcoats and 978
Aluminium - Degrease. Scour with Scotchbrite. Degrease again.
Galvanised steel - Clean and degrease. Use a proprietary acid wash if the surface has been chromate treated.
Drying:
Air dry in 15-20 minutes.
Recommend overcoating the same day. Allow at least 1 hour drying before overcoating with epoxies.
Do not stove.
Uses:
Gives excellent adhesion to galvanised steel and nonferrous metals. Gives extra protection to ferrous metals when used as the first primer coat.
Spray apply 70-100 microns Wet Film Thickness to achieve 7-10 microns Dry Film Thickness.
Must be overcoated the same day - no sanding.
Allow 1 hour before overcoating with epoxies, 20 minutes for other coatings.
Must use intermediate primer when overcoating with single pack topcoats and 978
Aluminium - Degrease. Scour with Scotchbrite. Degrease again.
Galvanised steel - Clean and degrease. Use a proprietary acid wash if the surface has been chromate treated.
Drying:
Air dry in 15-20 minutes.
Recommend overcoating the same day. Allow at least 1 hour drying before overcoating with epoxies.
Do not stove.
Additional Information
Shipping & Return
Related Products
Commodo sociosqu venenatis cras dolor sagittis integer luctus maecenas.
Recently viewed products
Commodo sociosqu venenatis cras dolor sagittis integer luctus maecenas.
Shopping cart